April 17, May 15, April 14, January 16, March 19, March 16, Skip to content Remington Test - Hodgdon H vs. Thanks to Hornady for their online ballistic calculator.

Conclusion is that in my rifle I can get a little more velocity with a little bit less power using H That extra FPS makes little difference in trajectory, but gives me ft lbs more energy for most hunting situations. Of course, that may differ in other rifles. Accuracy was about the same and point of impact on target was the same at yards. What I found is that while H may be one of the most used powders for the. I worked up loads to what I thought were max for my rifle which was 25 grains of H and 26 grains of H These loads are pretty warm but not as high as some of my reloading manuals list. I loaded 55 grain Winchester soft point bullets, used standard CCI small rifle primers and Winchester cases for the test. Velocities were measured with a Oehler P35 Choronograph. H is a short cut extruded powder and H is a ball powder, so many people think that H meters more accurately. He goes into detail about the differences. There are some differences in the calibers but you can safely fire the. Many of my reloads proved to be more accurate than these, with some cutting the groups in half.It is the civilian version of the 5. Hornady, Sierra and Speer provide plenty of different bullets for loading the 7. With this lube there is no danger of contaminating primers. I do this using a NexPander Tool which is also used to straighten the case mouths on those brass cases going through semi-automatic actions. In the future I will use only the expander designed to be used with 0. I used the two different expander balls and found some, but not all. Winchester and IMI brass cases are used, making it easy to keep loads with different diameter bullets separate. My records showed I used There is a lot of confusion concerning the latter, I have always said they were the same, and now H is marketed as IMR No difference in the performance of the two. Up to this point what little reloading I did for the 7. Since I had bullets on hand in both diameters, I decided to try both of them. I called Ruger to ask them what size barrels they used in their rifles and they told me it was 0. Reloading die sets come with two expander balls for these two sizes of bullets. Most foreign guns are cut for 0.220 Swift - Manufacturer Loading Data I was also pleasantly surprised how accurate it could be. It is very easy handling and I added to this feature by fitting its threaded barrel with a Ruger Muzzle Brake. I was sorely tempted when my friend Denis purchased a CZ bolt action 7. The solution, of course, was a bolt-action carbine. These yard targets were fired with the 7.

Dragon age inquisition save editor eham